ASM I.S. DESIGN FRONT AERO BUMPER IS 04  00-09 S2000 (AP1/AP2)
ASM I.S. DESIGN FRONT AERO BUMPER IS 04  00-09 S2000 (AP1/AP2)
ASM I.S. DESIGN FRONT AERO BUMPER IS 04  00-09 S2000 (AP1/AP2)
ASM I.S. DESIGN FRONT AERO BUMPER IS 04  00-09 S2000 (AP1/AP2)
ASM I.S. DESIGN FRONT AERO BUMPER IS 04  00-09 S2000 (AP1/AP2)
ASM I.S. DESIGN FRONT AERO BUMPER IS 04  00-09 S2000 (AP1/AP2)
  • Load image into Gallery viewer, ASM I.S. DESIGN FRONT AERO BUMPER IS 04  00-09 S2000 (AP1/AP2)
  • Load image into Gallery viewer, ASM I.S. DESIGN FRONT AERO BUMPER IS 04  00-09 S2000 (AP1/AP2)
  • Load image into Gallery viewer, ASM I.S. DESIGN FRONT AERO BUMPER IS 04  00-09 S2000 (AP1/AP2)
  • Load image into Gallery viewer, ASM I.S. DESIGN FRONT AERO BUMPER IS 04  00-09 S2000 (AP1/AP2)
  • Load image into Gallery viewer, ASM I.S. DESIGN FRONT AERO BUMPER IS 04  00-09 S2000 (AP1/AP2)
  • Load image into Gallery viewer, ASM I.S. DESIGN FRONT AERO BUMPER IS 04  00-09 S2000 (AP1/AP2)

ASM I.S. DESIGN FRONT AERO BUMPER IS 04 00-09 S2000 (AP1/AP2)

ASM-AP100002
Vendor
ASM
Regular price
$2,180.00
Sale price
$2,180.00
Regular price
Sold out
Unit price
per 

Please choose Carbon or FRP (Fiberglass) Version

ASM I.S. Design FRP Front Bumper 04 for Honda S2000. Fits on all model year S2000s. Also available in Dry Carbon Fiber.

This front bumper is designed to dramatically improve the vehicle’s aerodynamic performance. The lower area of the front opening directs airflow effectively into the diffuser, which helps improve front down force. Also, with the installation of the brake-cooling duct (optional), the right and left ducts allow a large amount of air to flow into them, therefore helping reduce braking temperatures. Having a common design from street use to GT use shows confidence in products’ aerodynamic performance.

ASM Dry Carbon and Fiberglass products are designed and produced at the Challenge Technology Center in Japan. They are produced with the same approach to dry carbon products as OEM to many major Japanese car manufacturers using pre-impregnated carbon materials. Design and production involve the use of CAD modeling, cutting plotters, 5-axis 3-D mills, high-pressure autoclaves, and water mills.